Wireless home alarm

Factory Direct gsm alarm system:1)New & hot home alarm 2) SIMCOME module 3) New main board 4) Import chip5) Lcd display

GSM wieless home alarm system & personal alarm panel protect and monitor house, supermarket, office, villa,factory, farm and so on.

 Specifications of burglar home alarm

A.Support GSM network, no telephone line will be available.

B.Support Monitoring centor software though GSM network.

C.Support battery protect function

D.Support memory function

1. Instruction of wireless burglar home alarm

The alarm system adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely. The system can be set delayed-arm. When a signal is detected by detectors, the detectors will send alarm signal to host immediately, then the host sends alarm SMS to its pre-set mobile phone numbers, and meanwhile dials its pre-set telephone/mobile phone numbers automatically and drive wiretap. In addition, users can dial the system and set it in arm/disarm mode by any remote phones.

 2. Main functions of gsm home alarm

1. GSM alarm transmission, without connecting telephone lines and be not afraid of cutting line.

2. Adapt wavecome double frequency GSM module.

3.9 guarding zones

  1 wireless SOS alarm zone, 1 wireless fire alarm zone, 1 external power failure alarm zone, the other 6 wireless zones can be defined by user (Please note zone 05 and zone 06 can also be used as hardwire zones.)

4. The host automatically stores system status, while its power is off.

5. The system equips backup rechargeable battery .It can work while the external power is off.

6. Report the guarding zones by SMS or voice and monitor the voice at the site remotely.

7. Remote arm/disarm, and set the host by wireless keyboard, SMS or any phones.

8. You can increase/decrease detectors.

9. Connect with the alarm center through GSM network.

3. Technical parameters of gsm wireless home alarm

a) GSM network frequency: 850/1900MHZ or 900/1800MHZ

b) External power failure alarm

Start-time: less than 1s

c) Alarm response time

Less than 10s (GSM in normality)

d) Power requirements: AC 220V 50Hz

Standby battery: DC8.4V

Standby battery working hours: more than 10 hours

e) Working conditions

Operating temperature: -20 to 60°C

Humidity: 20% to 95%

4.Standard Packing list of wireless burglar home alarm

One Main unit

One wireless PIR sensor

One door/window magnetic sensor

One wireless keypad

Two remote controls

One siren

One adapter

One English manual

  

Wireless home alarm